Cold Formed Section Steel - Heavy Duty Concrete Insert (P3200,P3300,P 3754,P 3270,P 3370 ) – Rainbow
Cold Formed Section Steel - Heavy Duty Concrete Insert (P3200,P3300,P 3754,P 3270,P 3370 ) – Rainbow Detail:
Concrete Insert Strut Channels installed in reinforced concrete provide a continuous slot for the precise location of cable, conduit, pipe, hanger rods or frames.
Install Concrete Insert Strut Channel across the anticipated area of use to save time and money by eliminating the need to drill and install anchors. Use in walls, floors and ceilings. All inserts are shipped complete with two Anchor Caps and Ethafoam filler. Ethafoam filler resists the entrance of wet concrete and is easily removed in one piece eliminating the significant clean-up required with old Styrofoam fillers.
Our company is a niche market supplier of high quality products that include: electrical and telecom strut,inserts,cable rack,anchor boltsetc. We are a design/build supplier which can provide a wild range of construction related products.
Product Description:
Item No.: P3200,P3300,P 3754,P 3270,P 3370
Product Name: Hot Dipped Galvanized Insert w/ 6″ Studs & Nuts
Included Parts:
5953 (Anchor End Cap)
6518 (Closure Strip)
1/2-M E/G G (1/2″ Nut w/o Spring)
9320 (Foam Pedestal)
Concrete Insert is ideal for anchoring structures and supports to concrete. This product allows easy installation before the concrete is poured, and attachment anywhere along its length using 1-5/8″ Fittings,Channel Nuts or other products. It is perfect for applications that may need to be re-configured or re-anchored.
This product may be used for anchorage on ceilings, floors or walls. Being a pre-pour installation, it is ideal for applications with cracked concrete concerns and avoids the creation of Silica Dust during installation. It is also OPA approved for seismic bracing applications.
Channel dimensions are 1 5/8″ wide x 1 3/8″ deep x 12 ga. thick. Embedment tabs are spaced at 8″ O.C. and have an embedment depth of 2-7/8″. The product may be supplied with Back Plates, End Caps and a Closure Strip to prevent concrete seepage into the channel, per the options below.
Our Concrete Insert is available in Pre-Galvanized (PG), Hot-Dip Galvanized (HG), and Plain (PL).
Options:
“CS/EC” Suffix – With Closure Strip, End Caps & Back Plates
“W/O” Suffix – No Closure Strip, no End Caps, with Back Plates
Part No. Length (ft) Finish Product Weight / Piece (lbs)
20′ CS/EC 20′ PG 38.8
20′ CS/EC 20′ HG 40.9
20′ CS/EC 20′ PL 38.6
20′ W/O 20′ PG 38.6
20′ W/O 20′ HG 38.6
20′ W/O 20′ PL 38.6
Product detail pictures:
Related Product Guide:
Steel length dimension
Fire protection measures for steel structures
we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is "You come here with difficulty and we supply you with a smile to take away" for Cold Formed Section Steel - Heavy Duty Concrete Insert (P3200,P3300,P 3754,P 3270,P 3370 ) – Rainbow , The product will supply to all over the world, such as: New Zealand, Houston, Lithuania, So We also continuously function. we, focuse on high quality, and are conscious of the importance of environmental protection, most of the merchandise are pollution-free, environmentally friendly solutions, reuse on the solution. We've Updated our catalog, which introduces our organization. n detail and covers the primary products we provide at present, You may also visit our web-site, which involves our most recent product line. We look forward to reactivating our company connection.
By Judy from Australia - 2018.02.08 16:45
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Cindy from United States - 2018.06.12 16:22