We always get the job done being a tangible team to make certain that we can easily give you the very best high quality and the most effective rate for factory Outlets for China Punching and Cutting Angle Steel Bar, We attend seriously to produce and behave with integrity, and with the favor of consumers at your house and abroad during the xxx industry.
We always get the job done being a tangible team to make certain that we can easily give you the very best high quality and the most effective rate for Angle Steel, China Angle Steel Bar, Facing fierce global market competition, we have launched the brand building strategy and updated the spirit of “human-oriented and faithful service”, with an aim to gain global recognition and sustainable development.
Description:

1. Low treatment cost: The cost of hot dip galvanizing is lower than that of other paint coatings.

2. Durable: Hot-dip galvanized angle steel has the characteristics of surface luster, uniform zinc layer, no leakage, no drip-slip, strong adhesion and strong corrosion resistance. In suburban environment, the standard thickness of hot-dip galvanized rust-proof can be maintained for more than 50 years without repair; in urban or offshore areas, the standard thickness of hot-dip galvanized rust-proof layer can be maintained for 20 years. It doesn’t need to be repaired.

3. Good reliability: The galvanized layer is metallurgical bond with the steel and becomes a part of the steel surface, so the durability of the coating is more reliable.

4. The coating has strong toughness: the galvanized layer forms a special metallurgical structure, which can withstand mechanical damage during transportation and use.

5. Comprehensive protection: Every part of the plated part can be galvanized, even in the depression, sharp corner and hidden place can be fully protected;

6. Time-saving and labor-saving: galvanizing process is faster than other coating construction methods, and can avoid the time required for painting on the site after installation.

Material

Q235 Q345 Q420 (low carbon steel ) Chemical composition

C:0.06-0.12 Mn:0.25-0.50 Si<=0.30 P<=0.45 Tensile strength :315-435 (Mpa)

Wall Thickness 3-20mm

Technology hot rolled

Shape angle

Sizes 20*20–250*250

Length 1-12m

Tolerance Wall thickness tolerance :+/-0.02mm Length tolerance :+/-10mm

Package 1.In Bundle 2.Plastic Outside In Bundles 3.In Bulk 4.As Customer’s Request

Delivery Time Within 20 days ,ASAP.According to the total quantity

Applications:

 Widely used in various building structure and engineering structure. Curtain wall,warehouse,greenhouse ,ect.