Steel length dimension

OEM/ODM Supplier Solar Panel Mounting Systems - Solar Mounting Structure System – Rainbow

Steel length dimension

  1. Range dimensions of steel

Steel length size is the most basic size of all kinds of steel, refers to the length, width, height, diameter, radius, inside diameter, outside diameter and wall thickness.The legal units of measurement for steel length are meter (m), centimeter (cm), millimeter (mm).The inch is also used in current usage, but it is not a legal unit of measurement.

  1. Indefinite length (normal length)

Where the product size (length or width), in the standard set within the scope, and do not require fixed size called indefinite feet.The indefinite length is also called the normal length.Metal materials delivered in indefinite measure are acceptable as long as they are delivered within the specified length.For example, for ordinary round steel not greater than 25mm, the length of which is usually stipulated as 4 ~ 10m, all round steel within this range can be delivered.

  1. Accurate Length

Cut to a fixed size as required by the order is called a sizing.When delivery is made to a fixed length, the metal material must be of the length specified by the buyer in the order contract.For example, if the contract states that 5m is the fixed length of delivery, the delivered materials must be 5m long, and any material shorter than or longer than 5m is disqualified.But in fact, the delivery cannot be all 5m long, so it is stipulated that positive deviation is allowed instead of negative deviation.

4. Multiple Length

According to the fixed size of the order required to cut into the whole multiple is called multiple.The length of the metal must be an integral multiple of the length specified by the Buyer in the order contract (called the single foot) (plus the saw opening).For example, the demander requires in the order contract that the single foot length is 2m, so the length is 4m when cut into double feet, 6m when cut into 3 times feet, and one or two saw mouths are added respectively.

The sawing amount is specified in the standard.When the size is delivered, only positive deviation is allowed, and no negative deviation is allowed.

 

5. Shortage Length

A short ruler whose length is less than the lower limit of the indefinite length specified in the standard, but not less than the minimum allowable length, is called a short ruler.For example, the water and gas pipe standard stipulates that 10% (by the number of pieces) 2-4m long short scale steel pipe is allowed in each batch.4m is the lower limit of the indefinite length, and the minimum allowable length is 2m.

6. Narrow Width

A narrow ruler is one whose width is less than the lower limit of the indefinite width specified in the standard, but not less than the narrowest width allowed.

Attention must be paid to the scale and the narrowest scale specified in the relevant standards when delivering goods on narrow scales.

 

Examples of steel length and size

1. Length and dimension of section steel

1) The standard length of the rail is 12.5m and 25m.

2) The dimensions of round steel, wire and steel wire are calibrated with the number of mm (mm) of diameter D.

3) The dimension of square steel is calibrated with the number of mm (mm) of side length A.

4) The dimensions of hexagonal and octagonal steel are calibrated by the number of millimeters (mm) of the opposite side distance S.

5) The dimensions of flat steel are calibrated in millimeters (mm) of width B and thickness D.

6) The dimensions of I-steel and channel steel are calibrated by the number of mm (mm) of waist height h, leg width B and waist thickness D.

7) The dimensions of equal-edge Angle steel are calibrated by the number of mm (mm) of equal side width B and side thickness D.Dimensions of unequal angles are specified in millimeters (mm) of side widths B, B, and d.

8) The dimension of H-beam is calibrated with the number of mm (mm) of the web height H, the width of the wing plate B and the web thickness T1 and t2.

2. Length and dimension of steel plate and strip

1) Generally, it is calibrated by the number of mm (mm) of the thickness of steel plate D.The strip is calibrated in millimeters (mm) of the strip’s width B and thickness D.

2) single sheet steel plate has specified different sizes, such as hot rolled steel plate: 1mm thick steel plate, width 600× length 2000 mm;650 x 2000 mm;700 x 1420 mm;750 x 1500 mm;900 x 1800 mm;1000 x 2000 mm, etc.

3. Length and dimension of steel pipe

1) Generally, the steel tube’s outside diameter D, inside diameter and the number of mm (mm) of wall thickness S are calibrated.

2) Each steel tube has a specified size, such as seamless steel tube with an outside diameter of 50mm and 15 kinds of wall thickness of 2.5-10mm;In other words, there are 29 types with the same wall thickness of 5mm and the outside diameter of 32-195mm.For example, the wall of welded steel pipe with nominal diameter of 25mm has 3.25mm ordinary steel pipe and 4mm thick steel pipe.

Our Main Product Range:

1. Steel Pipe (Round / Square/ Special shaped/SSAW)

2. Electrical Conduit Pipe (EMT/IMC/RMC/BS4568-1970/BS31-1940)   

3. Cold Formed Steel Section (C /Z /U/ M )

4. Steel Angle and Beam ( V Angle Bar / H Beam / U Beam)

5. Steel Scaffolding Prop

6. Steel Structure (Frame Works)

7. Precision Process On Steel ( cutting, straightening, flattening, pressing, hot rolling, cold rolling, stamping, drilling, welding, etc. According to customer’s requirement )

8. Steel Tower

9. Solar Mounting Structure

 006

Our Company Advantage:

1. Price:  Our Company is located in Tianjin China.  For decades, Tianjin has been the steel industry center and  the largest steel pipe production base in China.  The industry chain of steel and metal products is complete; It has a large  material and labor resources here.  So the steel pipe types made in here is very complete , the  quality is super , the price is very advantageous. AS a group company, our four factories can get a more favorable price of raw materials due to the large purchase quantity of single batch of materials. The prices of export products are all intro-group prices, so we have a price advantage over other independent exporters.

2. Transportation: Our mills are only 70km away from Tianjin Port, which is the Largest port in north China, with vessels ship to more than 300 ports in 170 countries.  Our company is only  It’s very Convenient and saves both time and cost in transportation.

3. One stop service: As a group company, we have four mills with a modern warehouse & processing facility, we can supply you with an extensive range of steel products: hot rolled and cold formed, including a wide variety of merchant bar, structural and tubular products.  We have all the domestic, commercial and industrial steel supplies and services you could possibly need.  So if you purchase from us, what we can provide is a one-stop steel product service.  It saves much of your purchasing time and sourcing cost.

4. Product Capacity and delivery:

We have a large production capacity, and  export more than 3500 tons per week (  nearly 150 20 GP containers )We can delivery the goods Within 20-30 days after receiving T/T deposit or L/C. For special urgent orders, we can shorten the leading time to 10 days.

5. Manufactured according to different standards,  Meet different standards: 

Since our products have been exported to many different countries and regions like Europe, America, Australia, Africa, Asia etc. , our products can meet the requirements of different national standards. If you have special requirements, just tell us, we can produce customized products for you, not only meet your quality requirements, but also save you cost a lot.

Our experienced and knowledgeable staff is always ready to answer your questions about our products and services.

Tianjin Rainbow Steel Group Co., Ltd.

Mobile: 0086-13163118004

E-mail: tina@rainbowsteel.cn

Wechat: 547126390

Web: www.rainbowsteel.cn

Web: www.tjrainbowsteel.com

 


Steel length dimension Related Video:


Our merchandise are commonly recognized and reliable by customers and can meet constantly developing economic and social desires for Schedule 40 Carbon Steel Pipe , 1 Inch Conduit Pipe , Ballasted Ground Mount Solar Racking , We provide OEM services and replacement parts to meet the varying needs of our customers. We give competitive price for quality solutions and we are going to make certain your shipment is handled quickly by our logistics department. We sincerely hope to have the opportunity to meet with you and see how we can help you further your own business.