With this motto in mind, we’ve got become certainly one of by far the most technologically innovative, cost-efficient, and price-competitive manufacturers for High definition China 100mm Electrical Weight of Gi Conduit Pipe Specification Gi Pipe, We warmly welcome domestic and abroad clients send inquiry to us ,we’ve got 24hours performing workforce! Anytime anywhere we have been still here being your partner.
With this motto in mind, we’ve got become certainly one of by far the most technologically innovative, cost-efficient, and price-competitive manufacturers for China Building Material Steel Pipes, Metal Conduit Pipe, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which are going to be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Intermediate Metal Conduit

IMC was developed in the 1970s as a thin-wall alternative to rigid metal conduit (RMC) that weighs about one-third less. IMC ships with either a straight-tapped or integral coupling. It features a galvanized OD and corrosion-resistant ID coating.

Applicable Tolerance:

Wall Thickness: +0.015”(+0.4 mm) or -0.000” (-0.0mm)

There is no specific wall thickness or tolerance for rigid conduits

The only specification available are those in the National pipe standard specifications for Steel Pipe (A-120)

Length:±1/4 in (6.4mm)

Standard: UL1242

Finishes: Hot-dip Galvanized, Zinc Plated, Pre-galvanized

Ends of pipe: One side threaded with coupling, one side with plastic cap

Minimum quantity or order: 10Mt

Loading Port: Tianjin Xingang Port, China

Package:

1.Big OD: in bulk;

2.Small OD: in bundles, packed by steel strips;

3.Waterproof package with plastic cloth;

4.Standard export package;

.5.According to customers’ requirements.

IMC Sizing

IMC is available in trade sizes 1/2 through 4, and 10′ lengths. Threads on the uncoupled end are covered by industry color-coded thread protectors to protect the threads, keep them clean and sharp, and aid in trade size recognition.

Using IMC as a Substitute for RMC

IMC is interchangeable with galvanized RMC. Both have threads with a 3/4-inch-per-foot taper, use the same couplings and fittings, have the same support requirements and are permitted to be used in the same locations.