Manufacturer for BS4568 Conduit Pipe - Electrical Conduit Pipe IMC – Rainbow
Manufacturer for BS4568 Conduit Pipe - Electrical Conduit Pipe IMC – Rainbow Detail:
Intermediate Metal Conduit
IMC was developed in the 1970s as a thin-wall alternative to rigid metal conduit (RMC) that weighs about one-third less. IMC ships with either a straight-tapped or integral coupling. It features a galvanized OD and corrosion-resistant ID coating.
Applicable Tolerance:
Wall Thickness: +0.015”(+0.4 mm) or -0.000” (-0.0mm)
There is no specific wall thickness or tolerance for rigid conduits
The only specification available are those in the National pipe standard specifications for Steel Pipe (A-120)
Length:±1/4 in (6.4mm)
Standard: UL1242
Finishes: Hot-dip Galvanized, Zinc Plated, Pre-galvanized
Ends of pipe: One side threaded with coupling, one side with plastic cap
Minimum quantity or order: 10Mt
Loading Port: Tianjin Xingang Port, China
Package:
1.Big OD: in bulk;
2.Small OD: in bundles, packed by steel strips;
3.Waterproof package with plastic cloth;
4.Standard export package;
.5.According to customers’ requirements.
Size |
Outside Diameter |
Inside Diameter |
Wall Thickness |
Length |
||||
inch |
inch |
mm |
inch |
mm |
(1)mm |
(2)mm |
feet |
mm |
1/2” |
0.815 |
20.70 |
1.660 |
16.76 |
1.98 |
1.79 |
10 |
3050 |
3/4” |
1.029 |
26.10 |
0.869 |
22.07 |
2.10 |
1.90 |
10 |
3050 |
1” |
1.290 |
32.80 |
1.105 |
28.07 |
2.35 |
2.15 |
10 |
3050 |
1-1/4” |
1.638 |
41.60 |
1.448 |
36.77 |
2.42 |
2.16 |
10 |
3050 |
1-1/2” |
1.883 |
47.80 |
1.683 |
42.74 |
2.54 |
2.29 |
10 |
3050 |
2” |
2.360 |
59.90 |
2.150 |
54.60 |
2.67 |
2.41 |
10 |
3050 |
2-1/2” |
2.857 |
72.60 |
2.557 |
64.95 |
3.56 |
- |
10 |
3050 |
3” |
3.476 |
88.30 |
3.176 |
80.67 |
3.56 |
- |
10 |
3050 |
3-1/2” |
3.971 |
100.90 |
3.671 |
93.24 |
3.56 |
- |
10 |
3050 |
4” |
4.466 |
113.40 |
4.166 |
105.82 |
3.56 |
- |
10 |
3050 |
IMC Sizing
IMC is available in trade sizes 1/2 through 4, and 10′ lengths. Threads on the uncoupled end are covered by industry color-coded thread protectors to protect the threads, keep them clean and sharp, and aid in trade size recognition.
Using IMC as a Substitute for RMC
IMC is interchangeable with galvanized RMC. Both have threads with a 3/4-inch-per-foot taper, use the same couplings and fittings, have the same support requirements and are permitted to be used in the same locations.
Product detail pictures:
Related Product Guide:
Fire protection measures for steel structures
Steel Deep Processing
It can be our accountability to satisfy your preferences and competently provide you. Your satisfaction is our greatest reward. We are searching ahead towards your visit for joint growth for Manufacturer for BS4568 Conduit Pipe - Electrical Conduit Pipe IMC – Rainbow , The product will supply to all over the world, such as: Austria, Netherlands, Sri Lanka, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Marian from Danish - 2018.12.22 12:52
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Jason from Karachi - 2018.12.22 12:52