Power Transmission Pole
1. Steel Tube Pole
Part I (Brief) :
Electric steel pole is a new set up power lines of power equipment in recent years, who are instead of traditional cement column wire rod products.Electric steel pole can be manufactured of polygonal and round steel pipe,and processed by hot dip galvanized. Mainly used for power line erection.
Part II (Characters and advantages):
1. Small area covered. 2. Smart appearance. 3. Convenient construction. 4. Short production.
Part III (Specifications):
| Height | 25FT~70FT |
| Suit for | Electric Power Transmission and Distribution/ Steel Tower Pole |
| Shape | Polygonal |
| Material | Normally :Q235B/ASTMA36/ENS235JR,Yeild Strength≥235MPa;Q345B/ASTMA572/ENS355J2, Yeild Strength≥345MPa |
| Power Capacity | 10kV to 220kV |
| Tolerance of the dimension | According to client’s requirement |
| Surface treatment | Hot-dip-galvanized following ASTM123, or any other standard by client’s requirement |
| Joint of Poles | Slip joint, flanged connected |
| Standard | ISO9001:2008 |
| Length of per section | Within 14M once forming |
| Welding Standard | AWS(American Welding Society)D 1.1 |
| Thickness | 2~30mm |
| Production Process | Raw material test-cutting-bending-welding-dimension verify-flange welding-hole drilling-sample assemble-surface clean-galvanization or power coating /painting-recalibration-packages |
2. Angel Steel Tower
Model Number: 220kV and below
Material: Steel Q235B Q345B Q420
Out Coating: Hot Dip Galvanized
Color: Silver/White
Application: 220kV and blow
Quality Control: ISO9001:2008
Welding Standard: AWS D 1.1
Galvanization Standard: ASTM123
Warranty Period: 20 years
Angle steel tower is a downcomer tray column.The plate pressure drop is small, with a large amount of gas, the plate efficiency is good, has the advantages of simple structure, convenient manufacture, good rigidity.
Part one (Characters and advantages) :
1. Transmission steel tower has single circuit line and double circuit line.
2. It is mainly composed of equilateral angle steel, and material used by Q235(A3F) or Q345(16Mn).
3. Steel tower is mainly composed of three parts: head tower, body tower and leg tower.
4. Steel Tower always used by transmission power line and EHV.
Part Two(Specifications):
| Material | Normally Q235B/A36,Yeild Strength≥235MPaQ345B/A572,Yeild Strength≥345MPa |
| Power Capacity | 10kV ,13.8kV,69kV,110kV,132kV,220kV or other |
| Tolerance of the dimension | According to client’s requirement |
| Surface treatment | Hot-dip-galvanized following ASTM123, or any other standard by client’s requirement |
| Standard | ISO9001:2008 |
| Production Process | Raw material test-Angle Marking -Hole Drilling-Angle Cutting-Angle Shovelling- Angle Fring –Angle Welding-Sample Assemble-Surface Clean-Galvanization -Recalibration-Packages |
| Packages | packing by bundles(set-wise or member-wise)with weight of 2~3 tons or according to client’s requirement |
3. High Lamp-post
| Product name | galvanized solar street lighting poles / street lamp post |
| Material | Q235,Q345,iron,Steel |
| Color | Customized |
| Height | 3-35 m |
| Thickness | 1.8mm-14mm |
| Surface treatment | Hot-Dip Galvanized and electrostatic spraying |
| Shape | Conical,octagonal,Customized |
| Arm type | Customized,single arm,double arms,triple arms |
| Base plate mounted | anchor bolts,nuts,screws |
| Powder coating | electrostatic spraying |
| Wind Resistance | Customized,according to customers’ environment |
| Welding standard | Advanced submerge-arc welding technology according to BS EN15614 |
| Thickness of galvanized | 80-100 microns in average according to BS EN ISO 1461 |
