Products

  • HDG Electrical Galvanized Customized Unistrut C Channel for solar mounting bracket

    HDG Electrical Galvanized Customized Unistrut C Channel for solar mounting bracket

    Place of Origin:Tianjin, ChinaBrand Name:RainbowWind Load:60m/sSnow Load:1.4KN/m2Warranty:3 yearsSurface Treatment:hot-dip Galvanized/Electrogalvanizing /zinc aluminum magnesiumThickness:0.8mm-3.0mmSize:41*21 / 41*41 / 41*52 / 41*62 / 41*72 / 41*82 mm or customized size.

  • slotted strut rail c channel 41/41 cheap galvanized steel solar photovoltaic

    slotted strut rail c channel 41/41 cheap galvanized steel solar photovoltaic

    Place of Origin:Tianjin, ChinaBrand Name:RainbowWind Load:60m/sSnow Load:1.4KN/m2Warranty:3 yearsSurface Treatment:hot-dip Galvanized/Electrogalvanizing /zinc aluminum magnesiumThickness:0.8mm-3.0mmSize:41*21 / 41*41 / 41*52 / 41*62 / 41*72 / 41*82 mm or customized size.

  • forkhead acrow prop four way fork head top scaffolding

    forkhead acrow prop four way fork head top scaffolding

    scaffolding fork head, The fork head is a 4 way u head which is assembled at the top of prop to support the H20 timber beam. It is made of steel sheet with 4 pcs of angle iron and a steel round tube.The angle iron usually have drilled holes for nailing the forkhead to timber beam.  It can also be used with other types of modular scaffolding systems to support various sizes of timber batten.

  • Solar Panel PV Mounting C Channel Carbon Steel Rails

    Solar Panel PV Mounting C Channel Carbon Steel Rails

    Place of Origin:Tianjin, China

    Brand Name:Rainbow

    Wind Load:60m/sSnow Load:1.4KN/m2

    Warranty:3 years

    Surface Treatment:hot-dip Galvanized/Electrogalvanizing /zinc aluminum magnesium

    Thickness:0.8mm-3.0mm

    Size:41*21 / 41*41 / 41*52 / 41*62 / 41*72 / 41*82 mm or customized size.

  • Manufacture Steel Plywood Formwork for Concrete Wall Forms

    Manufacture Steel Plywood Formwork for Concrete Wall Forms

    Steel Ply Forming System is very popular for wall concrete construction. Conveniently located handles make set up, stripping and handling easier. With proper care contractors can expect that forms will be able to be reused up to 200 times before plywood needs to be replaced. Compatible with all other industry standard modular handset systems. All sizes of heavy duty loop ties, x-flat ties, wedge bolts, and accessories to offer the complete system.

  • concrete formwork wall bracing turnbuckle form aligner

    concrete formwork wall bracing turnbuckle form aligner

    Turnbuckle Form Aligber The turnbuckle section of the aligner features a 1″ diameter self-cleaning coil thread for fast adjustments. Overall length of the aligner is 35″ minimum and 39″ maximum, offering 4″ of effective adjustment.  Turnbuckle Form Aligner has a bent nailing plate equipped with nail holes for nailing to forms and a 15/16″ hole to accept 3/4″ or 7/8″ round steel stakes when using the bracket from the ground up.  Aligner can be used repeatedly when cleaned of any concrete after use. The safe working load of the aligners is limited by the lumber, nailing and/or staking methods.

  • locking pin  spring hair pin pipe cotter pin

    locking pin spring hair pin pipe cotter pin

    We specialize in formwork and scaffolding for many years. We can offer you the best price by matching your specific need and requirement.We are looking forward hearing from you, please feel free contact us for further details And we’re sure that your any inquiry or requirement will get prompt attention.

  • Aluminium formwork waller bracket pipe clamp for construction

    Aluminium formwork waller bracket pipe clamp for construction

    Waler Bracket is the most rigid in the market. Simply insert the Waler Bracket into any  side rail slot not being used for ties, place a single or double 2″x4″ piece of lumber on top of the bracket and drop the wedge to tighten. We specialize in formwork and scaffolding for many years. We can offer you the best price by matching your specific need and requirement.We are looking forward hearing from you, please feel free contact us for further details.

  • Building Material Plywood Formwork Concrete Steel Snap Tie Wedge

    Building Material Plywood Formwork Concrete Steel Snap Tie Wedge

    Snap Tie Wedge make the installation of concrete formwork and walls easier and more efficient than ever with this high-strength, galvanized steel snap tie wedges.
    Designed to resist corrosion and hold up to both standard and heavy snap ties for any sized job, these wedges are superb for commercial or residential projects and can be reused time and again without performance suffering.

  • Wedge Pin Connect Flat Tie for Steel Plywood Formwork

    Wedge Pin Connect Flat Tie for Steel Plywood Formwork

    Wedge Bolts are used with x flat tie to tighten adjoining concrete forms&fillers, securing the x flat tie and concrete form in place. The full set of the Symons Formwork Accessories includes Wedge Bolt, X-Flat Tie, One Piece Waler Clamp, Z Tie Holders & Waler Tie, J-Strongback Hooks and Strongback Ties, Scaffold Brackets and Turnbuckles.

  • Aluminum Formwork Concrete Accessories One Piece Waler Clamp

    Aluminum Formwork Concrete Accessories One Piece Waler Clamp

    Waler Bracket is the most rigid in the market. Simply insert the Waler Bracket into any  side rail slot not being used for ties, place a single or double 2″x4″ piece of lumber on top of the bracket and drop the wedge to tighten.

  • Aluminium Concrete Formwork Accessories Wedge Pin Stub Pin For Construction

    Aluminium Concrete Formwork Accessories Wedge Pin Stub Pin For Construction

     

    Galvanized Wedge Pin Concrete aluminium Concrete Formwork Accesories Wedge Pin Stub Pin for construction to connect, The thin two-sided area is very small, and it is difficult to accurately apply force when striking. It needs to be repeatedly,struck with the help of other tools. In the process, it is easy to smash and cause damage to the surface of the aluminum mold.

  • Concrete Forms Wall Tie Snap Tie With Plastic Cone

    Concrete Forms Wall Tie Snap Tie With Plastic Cone

    Snap Ties are manufactured with integral heads, and Metal or Plastic Form Spreaders. Snap Ties are designed to easily tie lumber forming systems. Snap Ties have a nominal 1″ breakback. Each Tie incorporates an anti-turn device in order to properly break after use.Long End, Short End, and Odd End Snap Ties for plywood forming. Available with 1″ x 1″ cones (plastic),  washers (metal) and water resistant seal options.

  • Scaffold Base Jacks jack nut Scaffolding Base Plate nut

    Scaffold Base Jacks jack nut Scaffolding Base Plate nut

    Screw Jack Nut, Screw Jack Base head is used at the top of the cup lock standard (Vertical) to provide an additional maximum adjustment of length up to 300 – 600 mm. It is designed to be used in conjunction with adjustable system scaffolding. Our Jack Nut made of iron casting used to adjust the working heights.

  • Scaffolding joint pin Scaffold accessories Parts Joint Pin

    Scaffolding joint pin Scaffold accessories Parts Joint Pin

    Frame scaffolding is one of the most widely used scaffolding. Frame scaffolding has a simple disassembly, good bearing performance, safety and reliability. The role of scaffold pins is that scaffold pins are one of the important components of scaffold members, used to fix and connect scaffold members, ensuring the firmness and stability of the scaffold.

  • High Quality Adjustable Galvanized Steel Prop G Pin

    High Quality Adjustable Galvanized Steel Prop G Pin

    Prop G pin is the accessory of steel prop. It’s used to adjust the height of steel prop by inserting in different wholes.As a part of connector for the inner and outer tube, prop G pin is crucial for steel prop’s bearing support.

  • High quality galvanized steel scaffolding prop nut

    High quality galvanized steel scaffolding prop nut

    Adjustable Height Prop is for shoring with level plate on construction. Normal widely used in multi construction and building. In order to suit the project and environment, painted or galvanized surface can be provided, various & reasonable length is available, and with the option of the cup nut or sleeve, on iron or cast iron, or with the External thread or internal.

  • Building Steel Prop Sleeve Support Adjustment Height Prop

    Building Steel Prop Sleeve Support Adjustment Height Prop

    Steel shoring props are adjustable for the length, and used for formwork shoring system. One unit of scaffolding prop is including: base plates, cup nut or sleeve and iron casting nut, G pin. We specialize in formwork and scaffolding for many years. We can offer you the best price by matching your specific need and requirement.We are looking forward hearing from you.

  • Scaffolding Steel Forged Prop Nuts Prop Sleeve With Nut

    Scaffolding Steel Forged Prop Nuts Prop Sleeve With Nut

    Scaffolding Prop, Steel support refers to the use of steel pipes, H-beams, angle steels, etc. to enhance the stability of engineering structures. Generally, it is a tilted connecting component, and the most common ones are herringbone and cross shaped. Steel supports are widely used in subway and foundation pit enclosure. Due to the recyclability of steel supports, they have the characteristics of economy and environmental friendliness.

  • Post Safety Rope Post Sturdy And Safe For High-altitude Construction

    Post Safety Rope Post Sturdy And Safe For High-altitude Construction

    Safety Rope Anti-Fall Post is a fall prevention device that can protect the safety of construction workers during the installation of steel structures in high-altitude construction. It is equipped with a steel bracket with a horizontal grid line of steel wire rope as a soft beam. The soft beam in the middle of the bracket can be directly buckled and hung with the safety rope buckle on the construction workers. It has a simple structure and is easy to install and disassemble to prevent construction workers from falling.

  • Galvanized Scaffolding catwalk scaffold walk boards Sheeting Steel Plank

    Galvanized Scaffolding catwalk scaffold walk boards Sheeting Steel Plank

    Scaffolding Plank is constructed in profiled galvanized layers, the high quality of which guarantees their solidity and durability over the years. It has got a non-slip surface which allows anyone to workon the scaffolding with the greatest safety. It is constructed by a using completely automatic system, so does not need any maintenance. In order to ensure high efficiency they are constructed both with right and left hooks which allows their replacement with other ready made boards.