Welded post for Steel structure

Short Description:

Steel Structure is one of the materials which used for any kind steel construction, it is formed with a specific shape. These steel materials are of certain standards of chemical composition and proper strength. The steel materials are also defined as hot rolled products, having cross sections like angles, channels and beam. All across the world, there is an increasing demand for steel structures.

The rapid construction is possible in the steel structures. The have good fatigue strength and eused capability of steel construction.


Product Detail

Product Tags

Product Description:

Welding and hole on Angle bar
Welded Parts

 is one of the materials which used for any kind steel construction, it is formed with a specific shape. These steel materials are of certain standards of chemical composition and proper strength. The steel materials are also defined as hot rolled products, having cross sections like angles, channels and beam. All across the world, there is an increasing demand for steel structures.

There is a big advantage of steel over the concrete in terms of its ability to bear better tension as well as the compression which resulted in lighter construction. The steel authority of particular country takes care of the availability of  for construction projects.

There are various structures which come under the edges of steel structures. These structures may be used for the industrial, residential, office and commercial purposes. The purpose of bridge is for roadways and railway lines. The structures like towers are used for different purposes such as power transmission, nodal towers for mobile network, radar, telephone relay towers, etc.

Advantages:

Welding on H Beams
Welding parts and stamping

Advantages of :

In general, the advantages of steel structures are as follows:

Steel has a high strength to weight ratio. Therefore the dead weight of steel structures is relatively small. This property makes steel a very attractive structural material for some multi-storey building, long-span bridges, etc.

It can undergo the plastic deformation before failure; this provides greater reserve strength. This property is called as ductility.

Properties of steel can be predicted with a very high degree of certainty. In fact, steel shows elastic behavior up to a relatively high and usually well-defined stress level.

 can be built with the high-quality relationship and narrow tolerances.

Prefabrication and mass production is usually possible in steel structures.

The rapid construction is possible in the steel structures. This results in economic construction of steel structures.

The good fatigue strength is also the advantage of steel structure.

If necessary, the steel structures can be strengthened any time in future.

The reused capability of steel construction is also the advantage.

Company Introduction :

Our factory is the professional manufacturer for steel structure for solar mounting system, we covers an area of 66,000 square meters. We have complete Cold forming, Punching piles,  ground piles, Support rails, and Torque square tubes/round pipes for Solar Trackers and various stamping and welding  Parts. The products are widely used in Ground PV mounting system, Solar Tracker system, Fishery solar mounting system and PV Agricultural greenhouses, etc. We are also corporate with Array Technologies Inc on supplying the superior tracking system solutions and services for utility- scale projects.

FAQ:

Faq steel tube

  • Previous:
  • Next:

  • Write your message here and send it to us